Most nail polishes look glossy on day one, then chip and dull within a couple of days. Revlon ColorStay Longwear Nail Enamel is formulated to lock in colour and shine, helping your manicure stay fresh-looking for up to 11 days when used with the complementary base and top coat.

A blend of long-wear polymers, resins and plasticisers forms a flexible yet robust coating that helps resist chipping and peeling. Nitrocellulose creates a smooth film, while silica and finely milled pigments support even coverage and clarity. UV absorber Benzophenone-1 helps protect colour from fading and discolouration over time.

The fluid, self-levelling texture glides onto nails and settles into a smooth, high-shine finish. Once dry, the film feels lightweight yet resilient, designed to withstand daily handwashing, typing and light household tasks. Colour stays glossy rather than turning dull or chalky as the days pass.

For the longest wear, always pair this enamel with a dedicated base coat and top coat. Apply in thin layers, allowing each coat to dry properly so the film can set evenly and adhere more tightly to the nail surface.

ColorStay technology forms a long-wearing film that helps maintain shine and colour for up to 11 days.Flexible resin system is designed to bend with the nail, reducing stress fractures and tip chipping.Self-levelling liquid ensures a smooth, streak-resistant finish with minimal visible brush marks.Optimised solvent blend supports faster surface dry time while allowing the film to cure thoroughly.

Use with Revlon base coat to help anchor colour and smooth the nail plate, then seal with Revlon top coat to boost gloss and enhance chip resistance. Together, the system is designed to extend wear and maintain a freshly done look for longer.

A long-wear, high-shine enamel that helps you achieve a polished, salon-style manicure that lasts day after day.

Ethyl Acetate, Butyl Acetate, Isopropyl Alcohol, Adipic Acid/Neopentyl Glycol/Trimellitic Anhydride Copolymer, Nitrocellulose, Acetylated Hydrogenated Castor Glyceride, Acetyl Tributyl Citrate, Styrene Acrylates Copolymer, Synthetic Fluorphlogopite, Stearalkonium Bentonite, Calcium Aluminum Borosilicate, Polybutylene Terephthalate, Calcium Sodium Borosilicate, Polyethylene Terephthalate, Silica, Aluminum Calcium Sodium Silicate, Sucrose Acetate, Isobutyrate, Stearalkonium Hectorite, Trimethyl Pentanyl Diisobutyrate, Benzophenone-1, Dimethicone Aliphatic Urethane Acrylate, Boranedione, Citric Acid. May contain [+/-]: Mica, Titanium Dioxide (CI 77891), Iron Oxides (CI 77491, 77492.77499), Yellow 5 Lake (CI 19140), Red 6 Lake (CI 15850), Red 7 Lake (CI 15850), Red 30 Lake (CI 73360), Red 34 Lake (CI 15880), Aluminum Powder (CI 77000), Ferric Ferrocyanide (CI 77510), Bismuth Oxychloride (CI 77163), Guanine (CI 75170), Ultramarines (CI 77007), Blue 1 Lake (CI 42090), Black 2 (CI 77266)

• Step 1. Clean nails thoroughly, remove any old polish, and ensure the nail surface is dry and free of oils.
• Step 2. Apply a thin layer of base coat and allow it to dry to help smooth the nail and improve adhesion.
• Step 3. Apply the first thin coat of Revlon ColorStay Longwear Nail Enamel using 3 strokes per nail: one down the centre, then one on each side.
• Step 4. Allow the first coat to dry, then apply a second thin coat to build opaque, even coverage.
• Step 5. Finish with a layer of top coat, sealing the free edge of the nail to help lock in colour and shine.
• Step 6. Allow nails to dry fully and avoid hot water or heavy activity for at least 20–30 minutes to let the film cure.

Pro Tips

• Roll the bottle gently between your hands instead of shaking to minimise bubbles in the enamel.
• Keep coats thin; multiple light layers wear better and dry more evenly than one thick layer.
• Cap the free edge by running the brush lightly across the nail tip to reduce tip wear.
• Reapply top coat every few days to refresh gloss and support chip resistance.